久久成熟德兴若自然矣翻译_V与子敌伦刺激对白播放_A级毛片在线看_久久久精品人妻一区二区三区四区

BEST-121體積電阻率表面電阻測試儀

                   體積電阻率表面電阻測試儀符合標準：
Meet the standards:
GB/T 1410-2006《 塑料薄膜電阻率測定儀固體絕緣材料體積電阻率和表面電阻率試驗方法》
1410-2006 GB/T "test method for bulk resistivity and surface resistivity of solid insulating materials for plastic film electrical resistivity measuring instruments"
ASTM D257-99 《絕緣材料的直流電阻或電導試驗方法》
Test method for DC resistance or conductance of insulating materials by D257-99 ASTM
GB/T 2439-2001《硫化橡膠或熱塑性橡膠導電性能和耗散性能電阻率的測定》
2439-2001 GB/T - Determination of electrical conductivity and dissipative properties of vulcanized rubber or thermoplastic rubber
GB/T 10581-2006《絕緣材料在高溫下電阻和電阻率的試驗方法》
Test method for resistance and resistivity of insulating materials at high temperature by 10581-2006 GB/T
GB/T 1692-2008《硫化橡膠絕緣電阻率的測定》
1692-2008 GB/T "determination of electrical resistivity of vulcanized rubber"
GB/T 12703.4-2010《紡織品 靜電性能的評定 第４部分：電阻率》
12703.4-2010 GB/T "the fourth part of the evaluation of the electrostatic properties of textiles: electrical resistivity"
GB/T 10064-2006《測定固體絕緣材料絕緣電阻的試驗方法》
10064-2006 GB/T "test method for the determination of the insulation resistance of solid insulating materials"

                   體積電阻率表面電阻測試儀概述
First, an overview
塑料薄膜電阻率測定儀既可測量高電阻，又可測微電流。采用了美國In公司的大規模集成電路,使儀器體積小、重量輕、準確度高。以雙3.1/2 位數字直接顯示電阻的高阻計和電流。量限從1×104Ω～1×1018 Ω，是目前國內測量范圍zui寬，準確度zui高的數字超高阻測量儀。電流測量范圍為2×10-4 ～1×10-16Ａ。機內測試電壓為100/250/500/1000V任意可調。本儀器具有精度高、顯示迅速、性好穩定、讀數方便，適用于防靜電產品如防靜電鞋、防靜電塑料橡膠制品、計算機房防靜電活動地板等電阻值的檢驗以及絕緣材料和電子電器產品的絕緣電阻測量。本儀器除能測電阻外，還能直接測量微弱電流。
Plastic film resistivity tester can measure high resistance, and measuring current. Large scale integrated circuit of In company is adopted, which makes the instrument small size, light weight and high accuracy. High resistance meter and current with dual 3.1/2 bit digital direct display resistance. The measurement range is from 1 * 104 to 1 * 1018, which is the most wide measurement range and the highest accuracy. The current measurement range is 2 * 10-4 ~ 1 * 10-16A. The test voltage of the machine is adjustable for 100/250/500/1000V. The instrument has the advantages of high precision, display quickly, good stability, easy reading for inspection to the anti electrostatic products such as anti-static shoes, anti electrostatic plastic and rubber products, computer room anti static floor resistance value and insulating materials electrical and electronic products insulation resistance measurement. In addition to the measurement of resistance of the instrument, but also can directly measure the weak current.

                   體積電阻率表面電阻測試儀主要特點
Two, the main features
電阻測量范圍寬 1×104Ω～1×1018Ω
Resistance measurement range x 104 x 1 x 1018 x 1
電流測量范圍為 2×10-4Ａ～1×10-16Ａ
The current measurement range is 2 * 10-4A ~ 1 * 10-16A
體積小、重量輕、準確度高
Small size, light weight, high accuracy
電阻、電流雙顯示
Dual display of resistance and current
性能好穩定、讀數方便
Good performance and stable, easy to read
所有測試電壓(100/250/500/1000V) 測試時電阻結果直讀，免去老式高阻計在不同測試電壓下或不同量程時要乘以系數等使用不便的麻煩，使測量超高電阻就如用萬用表測量普通電阻樣簡便。既能測超高電阻又能測微電流
All the test voltage (100/250/500/1000V) to test the resistance results in reading, replacing the old high resistance meter in different test voltage or different scale to multiplied by the coefficient of use inconvenience trouble, enable the measurement of ultra high resistance as the multimeter is used to measure the general resistance of samples is simple. Not only can measure high resistance and micro current

                   體積電阻率表面電阻測試儀技術指標
Three, technical indicators
序號 項目 參數
Item parameters
1 電阻測量范圍 0.01×104Ω～1×1018Ω
1 resistance measurement range 0.01 * 104 ~ 1 * 1018
2 電流測量范圍為 2×10-4A～1×10-16A
2 current measurement range is 2 * 10-4A ~ 1 * 10-16A
3 雙表頭顯示 3.1/2位LED顯示
3 double headers 3.1/2 LED display
4 內置測試電壓 100V、250V、500V、1000V
4 built in test voltage 100V, 250V, 500V, 1000V
5 基本準確度 1% (*注)
5 basic accuracy 1% (* Note)
6 內置測試電壓 100V、250、500、1000V
6 built in test voltage 100V, 250, 500, 1000V
7 使用環境 溫度：0℃～40℃相對濕度<80%
7 using ambient temperature: 0 degrees Celsius to 40 degrees Celsius relative humidity <80%
8 供電形式 AC 220V，50HZ，功耗約5W
8 power supply form 220V 50HZ, AC, power consumption is about 5W
9 儀器尺寸 285ｍｍ× 245ｍｍ× 120 mm
9 instrument size 285mm * 245mm * 120 mm
10 質量 約2.5KG
10 the quality is about 2.5KG

                    體積電阻率表面電阻測試儀工作原理：
Four, working principle
根據歐姆定律，被測電阻Rx等于施加電壓V除以通過的電流I。傳統的高阻計的工作原理是測量電壓V固定，通過測量流過取樣電阻的電流I來得到電阻值。從歐姆定律可以看出，由于電流I是與電阻成反比，而不是成正比，所以電阻的顯示值是非線性的，即電阻無窮大時，電流為零，即表頭的零位處是∞，其附近的刻度非常密，分辨率很低。整個刻度是非線性的。又由于測量不同的電阻時，其電壓V也會有些變化，所以普通的高阻計是精度差、分辨率低。
According to Ohm's law, the measured resistance Rx is equal to the applied voltage V divided by the current I. The traditional high resistance meter works is the measurement of the voltage V fixed, by measuring the flow through the sampling resistance of the current I to get the resistance value. Can be seen from Ohm's law, due to the current I is inversely proportional to the resistance, and not directly proportional to, so the resistance to the display value is nonlinear, the resistance is infinite, the current is zero, namely header zero is infinity, near the scale is very close, the resolution is too low. The whole scale is nonlinear. And since the measurement of different resistance, the voltage V will be some changes, so the average high resistance meter is poor accuracy, low resolution.
本儀器是同時測出電阻兩端的電壓V和流過電阻的電流I，通過內部的大規模集成電路完成電壓除以電流的計算，然后把所得到的結果經過A/D轉換后以數字顯示出電阻值，即便是電阻兩端的電壓V和流過電阻的電流I是同時變化，其顯示的電阻值不象普通高阻計那樣因被測電壓V的變化或電流Ｉ的變化而變，所以，即使測量電壓、被測量電阻、電源電壓等發生變化對其結果影響不大，其測量精度很高()，從理論上講其誤差可以做到零，而實際誤差可以做到千分之幾或萬分之幾。
This instrument is the current flowing through the resistor V and the voltage across the resistor I measured at the same time, the large scale integrated circuit to complete the calculation of the internal voltage divided by the current, and then the results obtained after A/D conversion by the digital display of the resistance value, even if the current voltage V and the flow resistance of the two ends of the I is changed at the same time, the resistance value is not displayed as ordinary high resistance meter as a result of changes in the measured voltage or current change of V and I, so even if the measurement voltage, the measured resistance and power voltage change has little influence on the results, the measuring accuracy is very high (patent), according to the theory of the error can do zero, while the actual error can be done a few thousandths or very few.

                     體積電阻率表面電阻測試儀典型應用
Typical applications
1.硫化橡膠體積、表面電阻率測定
1 measurement of the volume and surface resistivity of vulcanized rubber
2.測量防靜電鞋、導電鞋的電阻值
2 measure the resistance value of the anti-static shoes and conductive shoes.
3.測量防靜電材料的電阻及電阻率
3 measure the resistance and resistivity of the antistatic material
4.測量計算機房用活動地板的系統電阻值
4 measure the system resistance value of the computer room floor
5.測量絕緣材料電阻(率)
5 measuring the resistance of insulating materials (rate)
6.光電二極管暗電流測量
6 photodiode dark current measurement
7.物理,光學和材料研究
7 physics, optics and materials research
8.高分子材料表面體積電阻率測定
Determination of surface bulk resistivity of 8 polymer materials

                     體積電阻率表面電阻測試儀標準配置：
Standard configuration:
序號 配置 數量 單位
Number unit
1 主機 1 臺
1 host 1
2 屏蔽箱 1 臺
2 shield box 1
3 電極 1 套
3 electrode 1 sets
4 測試線+電源線 5 條
4 test line + power cord 5
5 說明書+合格證 2 份
5 manual + 2 copies of the certificate
備注：
remarks：
本儀器配不同的測量電極（夾具）可以測量不同材料（固體、粉體或液體）的體積電阻率和表面電阻率或電導率，*符合國家標準GB1410－2006固體電工絕緣材料絕緣電阻、體積電阻系數和表面電阻試驗方法，ASTM D257 絕緣材料的直流電阻或電導試驗方法等標準要求。
The apparatus with different measuring electrode (fixture) can measurement of different materials (solid, powder or liquid) volume resistivity and surface resistivity or conductivity, in full compliance with national standards GB1410 - 2006 solid electrical insulation materials insulation resistance, volume resistivity and surface resistivity test method, ASTM D257 insulation material of DC resistance or conductance of test method standards requirements.