| 型號 | Model | Units | HR-1200.2R | ||
| 射出部分 | 螺桿直徑 | Screw Diameter | mm | ∮45 | ∮50 |
| 射出壓力 | Injection Pressure | Kg/cm | 1572 | 1275 | |
| 理論射出容量 | Theoretical Shot Volume | cm | 286 | 352 | |
| 射出量(P,S) | Max.Shor Weight | g/oz | 257/9.0 | 316/11 | |
| 射出率 | Injection Rate | cm/sec | 150 | 185 | |
| 鎖模系統 | 合模力 | Clamping Force | T | 112 | |
| 開模力 | Opening Force | T | 19 | ||
| 模柱間距 | Distance Between Tie Bars | mm | 650x430 | ||
| 最小模厚 | Min Mold Height | mm | 250/300 | ||
| 開模行程 | Opening Stroke | mm | 300 | ||
| 開模距 | Max.Open Daylight | mm | 550/600 | ||
| 頂出力量 | Ejector Force | T | 3.9 | ||
| 頂出高度 | Ejector Stroke | mm | 75 | ||
| 液壓電力系統 | 液壓 | Max.Hydraulic Pressure | Kg/cm | 140 | |
| 動作油量 | Pump Output | l | 350 | ||
| 油泵電機 | Pump Motor Power | Kw | 15 | ||
| 電熱容量 | Barrel Heating Power | Kw | 7.7 | ||
| 總用電量 | Total Wattage | Kw | 22.7 | ||
| 其他 | 圓盤直徑 | Round Set Diameter | mm | ∮1300 | |
| 機器重量 | Machine Weight | T | 6.3 | ||
| 機器尺寸 | Size(LxWxH) | m | 2.7x2.0x3.7 | ||
