序號 | 部位Position | 材料Material Science |
1 | 內、外襯 Inner and outer lining | 天然橡膠(NR)、氯丁橡膠(CR)、丁基橡膠(IIR )、丁晴橡膠(NBR)、 氟橡膠(FKM)、三元乙丙橡膠(EPDM)、聚四氟乙烯(PTFE) |
2 | 主體subject | 天然橡膠(NR)、氯丁橡膠(CR)、丁基橡膠(IIR)、丁晴橡膠(NBR),氟橡膠(FKM)、三元乙丙橡膠(EPDM) |
3 | 增壓環Pressure ringf | 多股鑄銅鋼絲Stranded copper wire |
4 | 法蘭lange | 鑄造、鍛造碳鋼Cast and forged carbon steel(Q235)不銹鋼Stainless steel(201、304, 316, 321)塑料Plastic(CPVC, PVDF, PPH, UPVC, RPP) |
項目 project 型號Model | KXT一10 | KXT一16 | KXT一25 | 備注Remarks |
工作壓力Mpa Working pressure Mpa | 1 .0(10) | 1 .6(16) | 2 .5(25) | A、如介質油,酸堿物質 B、工作溫度有特殊要求 C、也可來函來圖定制 D、訂貨時需說明 A. such as medium oil, acids and bases B.working temperature has special requirements C. you can also customize lettet to map D. ordemg to specify |
爆破壓力Mpa Bursting pressure Mpa | 2 .0(20) | 3 .0(30) | 4 .5(45) | |
真空度Kpa VacuumKpa | 53.3(400) | 86.7(650) | 100(750) | |
適用溫度℃ Applicable temperature | 一20℃一+115℃,特殊可達一30℃-+250℃ 一20℃一1 15℃.(for sPeeial eonditions)it ean be一30℃一250℃ | |||
適用介質Applicable medium | 空氣、壓縮空氣、水、海水、熱水、油、酸、堿等 Air, compresced air, water, sea water, hot water, oil, acid and alkali etc. |
公稱通徑DN Nominal diameter DN | 長度 Length L (mm) | 軸向位移 Axial displacement. | 橫向位移 Horizontal displacement(mm) | 偏轉角度 Deflexion angle (a1+a2) | ||
mm | inch | 伸長 Extension | 壓縮 Compression | |||
32 | 1 .25 | 95 | 6 | 9 | 9 | 15 |
4O | 15 | 95 | 6 | 10 | 9 | 15 |
5O | 2 | 105 | 7 | 10 | 10 | 15 |
65 | 2 .5 | 115 | 7 | 13 | 11 | 15 |
8O | 3 | 135 | 8 | 15 | 12 | I5 |
100 | 4 | 150 | 10 | 19 | 13 | 15 |
125 | 5 | 165 | 12 | 19 | 13 | 15 |
150 | 6 | 180 | 12 | 20 | 14 | 15 |
200 | 8 | 200 | 16 | 25 | 22 | 15 |
250 | 1O | 230 | 16 | 25 | 22 | 15 |
300 | 12 | 245 | 16 | 25 | 22 | 15 |
350 | 14 | 255 | 16 | 25 | 22 | 15 |
400 | I6 | 255 | 16 | 25 | 22 | 15 |
450 | 18 | 255 | 16 | 25 | 22 | 15 |
500 | 20 | 255 | 16 | 25 | 22 | 15 |
600 | 24 | 260 | 16 | 25 | 22 | I5 |
700 | 28 | 260 | 16 | 25 | 22 | 15 |
800 | 32 | 260 | 16 | 25 | 22 | 15 |
900 | 36 | 260 | 16 | 25 | 22 | 15 |
1000 | 4O | 260 | 16 | 26 | 24 | 15 |
1200 | 48 | 260 | 18 | 26 | 24 | 15 |
1400 | 56 | 350 | 2O | 28 | 26 | 15 |
1500 | 60 | 350 | 20 | 28 | 26 | 15 |
1600 | 64 | 350 | 25 | 35 | 3O | 10 |
注:1、特殊要求可技用戶圖紙制作,法蘭標準采用GB/T9115.1-2000,可選配(GB、JB,HG、CB, ANSI, DIN, BSEN, NF, EN, JIS
3、用戶使用像膠接頭,對應法蘭應是腳門法蘭或符合 GB/T9115.1《RF)法蘭。
Note: 1. special requirements can be made according to user drawings, flange standard GS[19115.1一2000. optional (GB, JB, MG, CB, ANSI, DIN, BS
EN, NF, EN, JIS),ISO) standard production of flange. Rubber ball to three yuan of natural rubber, ethylene propylene rubber, chloroprene rubber, but
yl rubber. nitrile rubber, fluorine rubber, etc.
2, the use of water suspended above ON200. the pipemust be fixedorlixed support bracket. or product should be installed pull off device.
3, the use of rubber joints,the corresponding flange should be the valve flange or GB/T9116.1 (RF)flange.