規格 Specifcations（可選配高速射出240-1000mm/sec及伺服機）
| 參數(Parameter)\型號(Model) | UNIT | KTW-160T-LR.SD | ||||
 | 射出系統 | 螺桿直徑 Screw Diameter | mm | 45 | 50 | 60 |
| 射出壓力 Iniection Pressure | kg/c㎡ | 2000 | 1800 | 1600 | ||
| 射出量 Max.shot Weight(PS) | g | 280 | 320 | 400 | ||
| 螺桿行程 Injection Rate | mm | 200 | ||||
| 螺桿轉數 Screw Speed Max | Turn | 0-280 | ||||
| 射嘴行程 Nozzie Retraction | mm | 250 | ||||
| 溫度控制段數 Number of temperature Cool | Snt | _ | ||||
 | 鎖模系統 | 鎖模力 Clampinh Force | Tons | 160 | ||
| 模板尺寸 Platen Size | mm | 1100*900 | ||||
| 模柱間距 Distance Between Tie Bere | mm | 700*500 | ||||
| 小模厚 Min.Mold Height | mm | 300/350（可根據模厚訂制） | ||||
| 開模行程 Opening Stroke | mm | 300 | ||||
| 大開模距離 Max.Open daylight | mm | 600/650（訂做機型距離有變化） | ||||
| 頂出壓力 Ejetor Force | Tons | 5 | ||||
 | 動力電熱系統 | 大液壓壓力 Max.Hydaulic Pressure | kg/c㎡ | 160 | ||
| 泵浦吐出量 Pump Outpet | 1/min | 69（伺服機以實際型號為準） | ||||
| 馬達電力 Pump Motor Power | kw/HP | 22.5/30HP（伺服電機以實際型號為準） | ||||
| 電熱容量 Berrel Heating Power | kw | _ | ||||
| 總用電量 Total Weight | kw | 23 | ||||
 | 其它 | 機器重量 Machine Weight | kg | 9100 | ||
| 機器外型尺寸 Machine Dimensions(L*W*H) | m | 2.9*3.0*3.9 | ||||
規格若有修改，恕不另通知！Specifcations are subject to change without prior notice!
