詳細信息
1 . DPM/DPG/MC/MJ型抵抗式計量件又稱比例接頭。
2 .管式結構，內設有限流桿和單向閥。
3 .開啟壓力：0 . 2 M P a。
4 .通過節流原理控制流量，按流通能力（流量定數）對流量進行比例分配。同型號計量件再潤滑系統中相互間距離的遠、近、高、低、臥裝或立裝均在實際使用中其出油量基本相同等。使用壽命長，比例接頭單向閥其橡膠密封件外部試壓銅套（除密封面外）防止橡膠密封件膨脹和老化。
5 .動作靈敏,排油暢通:比例接頭單向閥采用錐形彈簧,確保計量件動作敏與排油暢通,并防止排除的油劑逆流。
6 .流量比：同一型號的流量在實際使用過程中會有環境溫度的變化和油的粘度不同而發生化。
1.DPM/DPG/MC/MJ type resistance measuring parts are also called proportional joints.
2. Tubular structure with restrictor rod and check valve.
3. Opening pressure: 0.2MPa
4. Control the flow through the throttling principle and distribute the flow proportionately according to the flow capacity (flow number). The far,near, high, low, horizontal or vertical installations in the relubrication system of the same type of metering component are all basically the samein actual use. Long service life, the proportion of joints check valve rubber seal external pressure test copper sleeve (except the sealing surface) to prevent rubber seals from swelling and aging.
5. Sensitive operation and smooth oil discharge: The proportional joint check valve adopts conical spring to ensure that the metering part is sensitive and oil-free and prevents the excluded oil agent from flowing backwards.
6. Flow ratio: The flow of the same model will change with the change of the ambient temperature and the viscosity of the oil during the actual use.
