注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
四川川大干燥科技工程有限責任公司
四川川大干燥科技工程有限責任公司
暫無信息 |
一、工作原理及應用范圍介紹IntroductionofWorkingPrincipleandScopeofApplication本機系利用對稱或不對稱的兩只桶型容器組合成“V"字型，物料在V字型容器運行中形成一分一合過程
一、工作原理及應用范圍介紹
Introduction of Working Principle and Scope of Application
本機系利用對稱或不對稱的兩只桶型容器組合成“V"字型，物料在V字型容器運行中形成一分一合過程。在此運行過程中實現兩股物料充分混合之目的。本機適用于制藥、化工、食品等行業可進行兩種或兩種以上干粉狀、顆粒狀物料的混和。
The symmetrical or asymmetrical two bucket containers form the “V" shape, and the materials will be separated and combined separately during the operation of V-shaped container, thus to fully mix two materials during this process. This equipment is applicable to pharmacy, chemical and food industries for mixing of two or more dry powder and particle materials.
二、特點 Characteristics
1，該機混和筒結構，混和效率高、。
2，采用不銹鋼材料制作，內外壁拋光處理，外形美觀。
3，混合均勻，適用面較寬，并能根據用戶的要求配套強制攪拌器，以適合較細的粉粒、塊狀、含有一定水份的物料混合之用。
1. The mixing drum of this equipment is special in structure and high in mixing efficiency without dead angle.
2. It is made from stainless steels, and the internal and external wall are polished to form beautiful appearance.
3. It is uniform in mixing and wide in applicable scope; the forced stirrer may be provided according to customer’s requirements for mixing the fine powder, bulk and water-contained materials.
三、外形簡圖Dimension sketch
四、技術參數（下表中數值僅供選型時參考）
Technical parameters (the values in the table below are for reference in type selection only)
備注：裝載系數均為0.3-0.4，該表中的生產能力均按裝載系數0.4，物料密度0.6，混合時間6分鐘來計算。
Note: The charging coefficient is in the range of 0.3~0.4. The production capacity in the table shall all be calculated according to the charging coefficient of 0.4, the material density of 0.6 and the mixing time of 6 min.
V型混合機
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
