注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
上海靜一減震器制造有限公司武漢分公司
KDF可曲撓高壓橡膠接頭
KDF型可曲撓高壓橡膠接頭
KDF type flexible high tension rubber joint
序號 | 名稱 Name | 材料Material Science |
1 | 內外層膠 Inner and outer layers | NR.NBR,EPDM |
2 | 主體骨架 Main skeleton | 尼龍窗布 Nylon cloth |
3 | 增壓環Pressure ringf | 多股鍍銅鋼絲 Multi strand copper wire |
4 | 法蘭lange | Q235 |
主要技術參數Main technical parameters
項目 project 型號Model | KDF一10 | KDF一16 | KDF一25 |
工作壓力Mpa Working pressure Mpa | 1 .0(10) | 1 .6(16) | 2 .5(25) |
爆破壓力Mpa Bursting pressure Mpa | 2 .0(20) | 3 .0(30) | 4 .5(45) |
真空度KpaVacuumKpa | 53.3(400) | 86.7(650) | 100(750) |
適用溫度℃ Applicable temperature | 一20℃-+115℃,特殊可達一30℃-+250℃ 一20℃一1 15℃.(for sPeeial eonditions)it ean be一30℃一250℃ | ||
適用介質 Applicable medium | 空氣、壓縮空氣、水、海水、熱水、油、酸、堿等 Air, compresced air, water, sea water, hot water, oil, acid and alkali etc. |
公稱通徑ON!d.amotGr DN | 長度 (mm) | 螺栓數 n | 螺栓孔直徑 mm | 螺栓孔中心圓 直徑dlmm | 軸向位移displaeement | 橫向位移 (mm) | 偏轉角度 (a1+a2) Deflexion angle | ||
mm | inCh | 伸長 | 壓縮 | ||||||
32 | 125 | 95 | 4 | 18 | 100 | 6 | 9 | 9 | 15 |
40 | 1 .5 | 95 | 4 | 18 | 110 | 6 | 10 | 9 | 15 |
5O | 2 | 105 | 4 | 18 | 125 | 7 | 1O | 10 | 15 |
65 | 2 .5 | 1 15 | 4 | 18 | 145 | 7 | 13 | 11 | 15 |
8O | 3 | 135 | 4 | 18 | 16O | 8 | 15 | 12 | 15 |
100 | 4 | 150 | B | 18 | 180 | 10 | 19 | 13 | 15 |
125 | 5 | 165 | 8 | 18 | 210 | 12 | 19 | 13 | 15 |
150 | 6 | 185 | B | 18 | 240 | 12 | 2O | 14 | 15 |
200 | 8 | 2 10 | 8 | 23 | 295 | 16 | 25 | 22 | 15 |
25O | 10 | 23O | 12 | 23 | 350 | 16 | 25 | 22 | 15 |
300 | 12 | 245 | 12 | 23 | 400 | 16 | 25 | 22 | 15 |
350 | 14 | 255 | 16 | 23 | 46O | 16 | 25 | 22 | 15 |
400 | 16 | 255 | 16 | 23 | 515 | 16 | 25 | 22 | 15 |
450 | I8 | 255 | 20 | 26 | 565 | 16 | 25 | 22 | 15 |
500 | 2O | 255/290 | 20 | 26 | 62O | 16 | 25 | 22 | 15 |
600 | 24 | 260 | 20 | 26 | 725 | 16 | 25 | 22 | 15 |
700 | 28 | 26O | 24 | 3O | 840 | 16 | 25 | 22 | 15 |
750 | 3O | 400 | 24 | 3O | 840 | 16 | 25 | 22 | 15 |
800 | 32 | 260/300 | 24 | 33 | 950 | 16 | 25 | 22 | 15 |
900 | 36 | 260 | 28 | 33 | 1050 | 16 | 25 | 22 | 15 |
1000 | 4O | 260/300 | 28 | 36 | 1160 | 18 | 26 | 22 | 15 |
1100 | 44 | 300 | 28 | 36 | 1160 | 18 | 26 | 22 | 15 |
1200 | 48 | 300 | 32 | 39 | 1380 | 18 | 26 | 24 | 15 |
1300 | 51 | 3000/400 | 32 | 39 | 1380 | 18 | 26 | 24 | 15 |
1400 | 56 | 350/400 | 36 | 42 | 1590 | 2O | 28 | 26 | 15 |
1500 | 6O | 350 | 36 | 42 | 1590 | 2O | 35 | 26 | 15 |
1600 | 64 | 350 | 40 | 48 | 1820 | 25 | 35 | 3O | 10 |
1800 | 72 | 400/450 | 44 | 48 | 2020 | 25 | 35 | 3O | 1O |
2000 | 80 | 450 | 48 | 48 | 2230 | 25 | 35 | 3O | 10 |
2200 | 88 | 400/500/600 | 52 | 48 | 2390 | 25 | 35 | 3O | 1O |
2400 | 96 | 500 | 56 | 48 | 2600 | 25 | 35 | 3O | 1O |
2600 | 104 | 500 | 6O | 54 | 2810 | 25 | 35 | 3O | 10 |
2800 | 112 | 580 | 64 | 54 | 3020 | 25 | 35 | 3O | 10 |
3000 | 120 | 55O | 68 | S4 | 3220 | 25 | 35 | 3O | 10 |
注:I ,特殊要求可按用戶圖紙制作.法蘭標準采用GBfT9115.1-2000,可選配(GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS,
Note- 1 .special requirements can he made according tourer drawings, flange standard GBfT9115.1-2000, optional (GB, JB, HG, CB, ANSI, DIN, BS
EN, NF. EN. JIS),ISO) standard production of Clang.Rubbr ball to three yuan of natural rubb日r, ethylene propylene rubber. chloroprene rubber, but
yl rubber. nitrile rubber. fluorine rubber, etc.
2, the use o1 water suspended above DN200, the pipe must be fixed or fixed support bracket, or product should be installed pull oft device
3, the use of rubber joints, the corresponding flange should be the valve flange or GBIT9115.1 (RF) flange.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份