目錄:廣東樂善智能裝備股份有限公司>>電液混合EH系列>> SCJ-90EH2X2.15D上海江蘇中空吹塑機一步法全自動吹瓶機中空擠出機可外貿電液混合EH系列
| 類別Category | 電液混合EH系列 Hybrid EH series | |||||
| 機型Model | SCJ-90EH2X2.15D | |||||
| 項目 | Items | 單位Unit | 參數Specifications | |||
| 基本參數 Specification | 類別 | Category | / | 單層 1Layer | ||
| 制品大容積 | Max. Blow Volume | （L） | 5 | |||
| 適用原料 | Material | / | PE\PP | |||
| 模頭坯料數量 | QTY Of Die Head | / | 2 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | （mm） | 250/280 | |||
| 機器凈重約 | Net Weight | （kg) | 12000 | |||
| 機器外形尺寸 | Machine Dimension | （m，L×H×W） | 3.5*2.7*4.6 | |||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | ||
| 模頭加熱功率 | Die Head Heating Power | (kW) | 12.5 | |||
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 2 | ||
| 小合模距 | Min Mold Closing Distance | (mm) | 250 | |||
| 大開模距 | Max Mold Opening Distance | (mm) | 650 | |||
| 鎖模板尺寸 | Mold Plate Size | (mm,W×H) | 600*500 | |||
| 擺架行程 | Carriage Stroke | (mm) | 750 | |||
| 鎖模力 | Clamping Force | （kN) | 196 | |||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | (mm) | 90 | ||
| 螺桿長徑比 | Extruder Length/Diameter Ratio | / | 24 | |||
| 螺桿轉速 | Extruder Rotating Speed | (rpm) | 10~66 | |||
| 大塑化能力 | Max Extrusion Capacity | (kg/h) | 160 | |||
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 37 | |||
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | |||
| 機筒加熱功率 | Barrel Heating Power | (kW) | 17 | |||
| 冷卻風機功率 | Cooling Fan Power | kW | 0.72 | |||
| 動力系統 Power Unit | 擺架電機額定功率 | Carriage Motor Rated Power | (kW) | 5.5 | 5.5 | |
| 插筆電機額定功率 | Blow Pin Motor Rated Power | (kW) | 3 | 3 | ||
| 抬頭電機額定功率 | Head Lifing Motor Rated Power | (kW) | 2.2 | |||
| 油泵電機額定功率 | Oil Pump Motor Rated Power | (kW) | 15 | |||
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m3/h | 17 | |||
| 熱切刀功率(選) | Hot Knife Power | (kW) | 0 | |||
| 裝機總功率I | Total Installed Power I | (kW) | 98.42 | |||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/160 | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注2 Remarks | 以上機型均可搭載100點壁厚控制系統，疊加后改變的參數如下 The above model can be equipped with 100 point parison cool system. The parameters to be changed after superposition are as follows. | |||||
| 電動壁厚控制 Servo parison cool | 機型 | SCJ-90EH+S2X2.15D | ||||
| 壁厚伺服電機額定功率 | Parison Servo Motor Rated Power | kW | 4.5 | |||
| 裝機總功率II | Total Installed Power II | kW | 102.92 | |||
| 鎖模板示意圖 Clamping plate |  | |||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 | ||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||||
3
塑料機械網