型號 Model | Unit | KS-160T-D | KS-200T-D | |
injection system | 射出系統 | 螺桿直徑 Screw Diameter | mm | 45 | 50 | 50 | 55 |
射出壓力Injection Pressure | Kg/cm² | 2174 | 1761 | 1915 | 1582 |
理論射出容量Theoretical Shot Volume | cm³ | 318 | 392 | 392 | 475 |
射出量 Max.shot Weight(ps) | g | 294 | 362 | 362 | 439 |
oz | 10.4 | 12.8 | 12.8 | 15.5 |
射出速度 Injection speed | mm/s | 91 | 103 |
射出速率 Injection Rate | cm³/s | 145 | 179 | 202 | 245 |
螺桿轉速 Screw Speed Rotation | r.p.m | 270 | 278 |
溫度控制段數 Number of Temperature Cool | Zone | 4 | 4 |
Clamping system | 鎖模系統 | 鎖模力 Clamping Force | Tons | 160 | 200 |
開模力 Opening Force | Tons | 16 | 16 |
滑板尺寸 Platen Size | mm | 650*680 | 700*700 |
滑板行程 Slide table stroke | mm | 580 | 650 |
模柱間距（L×W）Distance Between Tie Bars | mm | 560*730 | 580*785 |
小模厚 Min.Mold Thickness | mm | 240 | 260 |
大容模尺寸（L×W）Max.Mold Size | mm | 530*530 | 580*600 |
開模行程 Oprening Stroke | mm | 300 | 300 |
頂出力量 Ejector Force | Tons | 3.9 | 3.9 |
頂出行程 Ejector Stroke | mm | 160 | 160 |
Electric system and otherw | 電力及其它 | 大液壓壓力 Max.Hydaulic Pressure | Kg/cm² | 140 | 140 |
電機電力 Pump Motor Power | kw/HP | 22/30 | 30/40 |
電熱容量 Barrel Heating Power | kw | 8 | 8 |
機器重量 Machine Weight | Tons | 5.1 | 5.8 |
機器外型尺寸Machine Dimensions(L×W×H) | m | 2.3*1.7*4 | 3*1.8*4.3 |
注:本參數按聚苯乙烯比重1.05,注射系數取0.88計算。如有設計更改，恕不另行通知。
Note: this parameter according to the proportion of polystyrene is 1.05, the injection coefficient of 0.88. If there are any design change, without prior notice. |
|
