| 型號規格 Specifications | 單位 UNIT | CH300F | |
| *號International size rating | 1440 | |
| 注射裝置 INJECTION UNIT | | A | B | C | |
| 螺桿直徑 Screw diameter | mm | 55 | 60 | 65 | |
| 螺桿長徑 Screw L/D ratio | L/D | 22 | 20 | 18.5 | |
| 理論注射容Theoreticai shot volume | cm3 | 713 | 848 | 995 | |
| 注射量 Shot weight(PS) | g | 649 | 772 | 906 | |
| OZ | 22.9 | 27.2 | 32.0 | |
| 注射壓力 Injection pressure | Bar | 2023 | 1700 | 1449 | |
| 注射速率 Injection rate(PS) | g/s | 192 | 228 | 268 | |
| 射膠行程 Injection stroke | mm | 300 | |
| 螺桿轉速 Max.screw speed | rpm | 160 | |
| 塑化能力 Plasticizing capacity(PS) | g/s | 41.4 | 49.1 | 54.6 |
| 射嘴接觸力Nozzle sealing force | KN | 83 | |
| 鎖模裝置 CLAMPING UNIT | | | |
| 鎖模力 Clamping force | KN | 3000 | |
| 開模行程Opening stroke | mm | 550 | |
| 拉桿間距Distance between tie-bars | mm | 630x580 | |
| 小模具尺寸Min mould dimension | mm | 410x380 | |
| 小模厚Max.mold height | mm | 620 | |
| 小模厚Min.mold height | mm | 230 | |
| 模板大開距MAX.Dalylight | mm | 1170 | |
| 頂出行程Ejector stroke | mm | 150 | |
| 頂出力Ejector force | KN | 70 | |
| 頂出數 No.of ejector pins | PCS | 12+1 | |
| 其它 OTHERS | | | |
| 系統壓力System pressure | Mpa | 16 | |
| 油泵排量Hydraulic pump capacity | CC | 100 | |
| 電馬達功率Drive mootor power | kw | 30 | |
| 電熱功率 Heator Power | kw | 13.5 | |
| 加熱段數 No.of heater zones | pcs | 4+1 | |
| 外形尺寸Machine dimensions(LxH) | m | 5.8x1.72x2.25 | |
| 理論機重Machine weight | Tom | 10 | |
| 容積Oil tank capacity | L | 430 | |
| 模板正面尺寸圖 Platen dimensions | | |
| 模板側面尺寸圖 Mould space dimensions | |
