| 型號規格 Specifications | 單位 UNIT | CH600F |
| *號 International size rating | 3220 |
| 注射裝置 INJECTION UNIT | | A | B | C | D |
| 螺桿直徑 Screw diameter | mm | 75 | 80 | 85 | 90 |
| 螺桿長徑比Screw L/D ratio | L/D | 21 | 20 | 19 | 18 |
| 理論注射容Theoreticai shot volume | cm3 | 1727 | 1965 | 2219 | 2487 |
| 注射量 Shot weight(PS) | g | 1572 | 1788 | 2019 | 2264 |
| OZ | 55.4 | 63.1 | 71.2 | 79.8 |
| 注射壓力 Injection pressure | Bar | 1865 | 1639 | 1452 | 1295 |
| 注射速率 Injection rate(PS) | g/s | 424 | 483 | 545 | 611 |
| 射膠行程 Injection stroke | mm | 391 |
| 螺桿轉速 Max.screw speed | rpm | 136 |
| 塑化能力 Plasticizing capacity(PS) | g/s | 60.2 | 72.5 | 79.6 | 90 |
| 射嘴接觸力Nozzle sealing force | KN | 141 |
| 鎖模裝置 CLAMPING UNIT | | |
| 鎖模力 Clamping force | KN | 6000 |
| 開模行程 Opening stroke | mm | 770 |
| 拉桿內間距Distance between tie-bars | mm | 882x800 |
| 小模具尺寸Min mould dimension | mm | 575x520 |
| 小模厚 Max.mold height | mm | 810 |
| 小模厚 Min.mold height | mm | 330 |
| 模板大開距MAX.Dalylight | mm | 1580 |
| 頂出行程Ejector stroke | mm | 200 |
| 頂出力 Ejector force | KN | 125 |
| 頂出數 No.of ejector pins | PCS | 12+1 |
| 其它 OTHERS | | |
| 系統壓力System pressure | Mpa | 16 |
| 油泵排量 Hydraulic pump capacity | CC | 100+63 |
| 電馬達功率 Drive mootor power | kw | 55 |
| 電熱功率 Heator Power | kw | 33.5 |
| 加熱段數No.of heater zones | pcs | 5+1 |
| 外形尺寸Machine dimensions(LxH) | m | 8.95x2.2x2.38 |
| 理論機重 Machine weight | Tom | 26 |
| 容積 Oil tank capacity | L | 900 |
| 模板正面尺寸圖 Platen dimensions | |
| 模板側面尺寸圖 Mould space dimensions |
