塑料機械網
詳細介紹
| 項目 | Item | 單位 | Z650/JB | |||
| 注射裝置 | INJECTION UNIT | A | B | C | D | |
| 螺桿直徑 | Screw diameter | mm | 90 | 95 | 100 | 105 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 2735 | 3048 | 3377 | 3723 |
| 注射重量 | Injection weight(ps) | g | 2489 | 2774 | 3073 | 3388 |
| 注射速率 | Injection rate | g/s | 552 | 612 | 679 | 748 |
| 注射壓力 | Injection pressure | Mpa | 184 | 165 | 149 | 135 |
| 螺桿轉速 | Screw speed | rpm | 145 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | kN | 6500 | |||
| 移模行程 | Open stroke | mm | 870 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 880×880 | |||
| 模厚 | Max.Mold height | mm | 900 | |||
| 最小模厚 | Min.Mold height | mm | 350 | |||
| 頂出行程 | Ejector stroke | mm | 250 | |||
| 頂出力 | Ejector stroke | kN | 150 | |||
| 其他 | OTHERS | |||||
| 油泵壓力 | Max Pump pressure | kW | 16 | |||
| 油泵電機功率 | Pump motor power | kW | 30+37 | |||
| 電熱功率 | Heating power | kW | 42.8 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 10.2×2.24×2.71 | |||
| 油箱容積 | Olitank cubage | L | 1100 | |||
| 機器重量 | Machine weight | t | 28 | |||
未找到相應參數組，請于后臺屬性模板中添加
暫未實現,敬請期待
暫未實現,敬請期待
塑料機械網