節省65%電力：使用水循環方式加熱的方法

省人力：使用自動開合模，亦可選擇機械手進行自動澆注

PU鞋墊鞋底澆注機：

這條生產線可以同時制作多種不同顏色的產品。

.X,Y軸設計，滿足澆注頭上下，左右運動的需要。

.自動灌注、計量準確、注料位置精準。

.混合速度高、原料同步性好，混合均勻。

.*的混合系統設計、混合頭更換簡單、快速。

PU鞋墊鞋底全自動生產線：

.堅固的機械構造，運行平穩、使用壽命長、節省人工。

.自動開合模具、高強度合模壓力、閉合緊密、有效節省原材料。

.自動搖模，滿足各種型體的多種搖模方式。

.自動加溫，鋁合金模板快速導熱、節約能源。

.根據國內模具的實際情況，開發出*的模具裝夾機構，模具更換簡單、快速。

注：我們可以根據客戶的實際需求設計以及生產全自動機械。

成品圖片：

我們的服務：

我們的優點：

Fully automatic polyurethane PU outsole and insoles automatic foaming equipment/foaming machine 

PRODUCT APPLICATION

This polyurethane Foaming machine with mould carrier line can produce various twin-color and single-color polyurethane insoles, outsoles. The mold injection is automatic controlled.

Why choose it:

1. Imported components are used for the metering pump and electrical components, greatly enhancing equipment running reliability and service life.

2. The moulds can be opened and closed automatically by the pneumatic system which can save the labor cost.

3. The molds are heated by circulating water heating system, it can save 3/2 electricity as the traditional way, and the temperature of the molds are stabler.

TECHNICAL DETAILS

Item Name: LZ-XC905 triple-components foaming machine

All power of the machine 12KW,4*380V/60HZ

The type of applicable foam:Sole,insole, walking shoe, etc.

Flux of inject:30g-100g/S (Attention:the flux could be configured)

The press of infect:0.1MPA-3.99MPA

The mix proportion:100-65;100-110

Viscosity(22°) POLY( polyethylene )500-2000MPAS ISO( Multi-isocyanate )500-2000MPAS

Time of injecting:0.01-9.99/S( precision 0.01S)

Precision of injection:0.1/100

Process of injecting: automatic inject by PLC programmed

Pneumatic pressure:0.6-0.8MPa

Dimension:Wide:2.1M; High:2.35M; Long:3.5M

Weight of the machine:1.5ton

Pouring nozzle:With collision impact needle, Never wear, Never plug

PLC Programmed computer(English demonstration)

It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically

heat system:It can automatic control temperature

Turntable production line

Total power:22kw

Pneumatic mold station: 100, 120, 160 for choose.

Material for work station:3mm, iron plate

Water heating box:150L,304 stainless steel,18KW

Water-circulating pige:With joints

Line height(without mould):750mm

Driving Motor:3kw

Transducer:1 set

Diameter for production line:About 8 meter