特點介紹：

1、威勝系列是公司根據全電動注塑機的產品需求特點，專門研發的一款肘桿式全電動注塑機，開合模、頂出、儲料、注射四部分均為

     伺服電機驅動，實現制品成型的高精度與高穩定性。
     Weisheng series is a toggle-type all-electric injection molding machine specially developed by the company according to

     theproduct demａnd characteristics of all-electric injection molding machines.The four parts of mold opening and closing.ejection.

     materialstorage and injection are all driven by servo motors,thus realizing high precision and stability of product molding.
2、模版，肘桿等鎖模部件均采用高倍數設計，既提升開合模部分的鋼性與精度，同時又實現對模具更好的安全保護。具有更靈敏的低壓

     模保功能。
     Mould-locking parts,such as templates and toggle bars. are designed with high magnification,which not only improves

     therigidity and precision of the mould opening and closing part.but also realizes better safety protection for the mould,

     and has moresensitive low-voltage mould protection function.
3．移動模板支撐采用線性導軌，與石墨銅套加潤滑脂潤滑，保證模具區清潔，特別適合醫療產品與高精度光電產品。

     The movable template support adopts linear guide rail,which is lubricated with graphite copper sleeve and grease to

     ensure   thecleanliness of the mold area,especially suitable for medical products and high-precision photoelectric products.
4．優化注射運動部件設計，使注射速度提升，動態響應快，注射速度響應均小于40ms．滿足客戶對超薄及超精密產品的高要求成型。       

     Optimize the design of the injection moving parts,so that the injection speed is improved.the dynamic response is fast,

     and theresponse of the injection speed is all less than 40ms,meeting the high requirements of customers for uttra-thin

     and ultra-  precision products.
5．控制系統對注射速度與壓力均實現閉環控制，滿足高標準成型工藝要求，生產過程穩定可靠，注射及保壓壓力精度可達0.1mpa。

     The system realizes closed-bop control of injection speed and pressure,which meets the requirements of

     high-standardmolding    process.The production process is stable and reliable, and the precision of injection and holding

     pressure canreach 0.1mpa.
6、儲料與開合模同步，開模和頂出同步，大大縮短產品成型周期。
     Material storage is synchrorized with mold opening and closing,ａnd mold opening and ejection are synchronized,which

     greatlyshortens the product molding cycle.
7、注射絲桿及壓力傳感器均采用日本品牌產品，確保機器運行精度及壽命，并且采用350mm／s與200mm／s的高射速來滿足高要求的成型產品。
    The injection screw and pressure sensor are made of Japanese brａnd products to ensure the running accuracy and service

     lifeof the machine.ａnd the high firing rate of 350 mm/s and 200 mm/s is adopted to meet the requirements of high speed.

     Thereguired molried products.